Biocompatible magnetite nanoparticles coated with ionic liquid-based surfactantas a hydrophilic sorbent for dispersive solid phase microextraction of cephalosporins prior to their quantitation by HPTLC.

Extraction of highly hydrophilic compounds from biological fluids including urine or plasma samples is a dilemma due to high hydrophilicity of the matrix itself. The main aim of the current work is to explore the competence of ionic liquid (IL)-based surfactant-coated mineral oxide nanoparticles (NPs) in dispersive solid-phase microextraction (d-SPME) of highly hydrophilic analytes taking cefoperazone (CPZ) as a model analyte for the study. The IL-based surfactant coated Fe3O4 NPs is utilized as an innovative adsorbent for the separation and pre-concentration of CPZ after intramuscular injection (I.M) in rabbits. The utilized magnetite NPs were synthesized via simple and reliable co-precipitation procedure, which doesn't require any air-free environment and depends on a single iron (III) salt. Characterization of the as-synthesized NPs was achieved by X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) and energy dispersive X-ray (EDX). Surface area measurements show that Fe3O4 NPs have large surface area of 75 m2 g-1. The developed approach utilizes the unique properties of the IL-based surfactant including multiple polar interaction types provided by the polar head in addition to merits of Fe3O4 nanoparticles, which include large adsorptive capacity and magnetic properties, to improve separation, save time, and achieve satisfactory recovery. Comprehensive study was developed for the factors, that affect the adsorption capacity such as pH, NPs amount, IL-based surfactant concentration, ionic strength, adsorption time, and desorption conditions. Moreover, the adsorption data was fitted to Langmuir and second-order kinetic models as reflected by the reasonable determination coefficients of 0.9319 and 0.9726, respectively. Under the optimized conditions, the developed approach achieves good correlation coefficient of 0.9975, and 0.9981 over linearity range of 0.7-12.0 and 4.0-50.0 µg mL-1 for both CPZ standard solutions and spiked rabbit plasma, respectively. It also provides good sensitivity expressed by the low values of limit of detection (LOD) of 0.2 and 1.2 µg mL-1 and limit of quantitation (LOQ) of 0.7 and 4.0 µg mL-1 for both the standard solutions and spiked plasma, respectively. The developed approach was also applied successfully for monitoring CPZ in rabbit plasma samples with satisfactory recovery % (83-110). In addition, a detailed pharmacokinetic study is performed where pharmacokinetic parameters of CPZ in rabbit plasma samples were calculated.

Micellar Thin Layer Chromatography and Computer-Aided Analysis of Empagliflozin, Linagliptin and Metformin HCl Ternary Mixture.

The present work was performed in order to study the mechanism of micellar thin layer chromatography (MTLC) and to develop a new simple and sensitive simultaneous MTLC method for separation of empagliflozin, Linagliptin and metformin hydrochloride ternary mixture. The study was done using three different surfactants; sodium dodecyl sulphate (SDS), benzalkonium chloride (BAC) and polysorbate 80 (tween 80). Chromatographic procedure was performed using micellar mobile phase that composed of aqueous solution of each surfactant and methanol (6: 4 v/v) and micellar TLC determination at λmax 237 nm. Separation using SDS (anionic surfactant) and BAC (cationic surfactant) depends on ionization potential (AMI-IP), partition coefficient (logP (o/w)) and hydrogen bond donor atoms (a-don), whereas separation using tween 80 depends mainly on the lipophilicity (RM0), solvation energy (E-sol) and Van der Waals energy (E-vdw). Quantitative structure-retention relationships study was carried out, modeled, evaluated and validated using molecular operating environment software.

Simple TLC-spectrodensitometric method for studying lipophilicity and quantitative analysis of hypoglycemic drugs in their binary mixture.

A selective and simple salting-out-assisted thin-layer chromatographic methodology was developed for the simultaneous determination of two oral hypoglycemic drugs, dapagliflozin (DAPA) and metformin (MET) in their pure forms, tablets and spiked human plasma samples. Silica gel 60 F254 plates were used in the separation of the two drugs using a mobile phase consisting of 0.5 m (NH4 )2 SO4 and methanol (3:7, v/v). The plates were scanned in the reflectance mode at λmax = 237 nm. The obtained retardation factor (Rf ) values for DAPA and MET were 0.77 ± 0.02 and 0.25 ± 0.02, respectively. The thin-layer chromatography method was validated according to International Conference on Harmonization guidelines. The peak areas were linearly increased with the increases in concentrations of 45-1,000 and 50-1,500 ng/band for DAPA and MET, respectively. Moreover, the method was applied to estimate the molecular lipophilicity parameters of DAPA and MET via retention data. The suggested method was efficiently utilized for the analysis of DAPA and MET in pharmaceutical tablets and plasma samples with recoveries 98.4-100.4 and RSDs in the ranges of 1.4-2.6 and 2.2-3.0% for DAPA and MET, respectively.

A Glassy Carbon Electrode for the Determination of Linagliptin, an Antidiabetic Drug in Pure Form, Tablets and Some Biological Fluids by Adsorptive Stripping Voltammetry.

AIM: The present work provides a fast, simple, accurate, and inexpensive analytical method for the determination of Linagliptin (anti-diabetic drug). METHODS: The analysis was performed using a square wave adsorptive anodic stripping voltammetric technique (SWAASV) and glassy carbon electrode (GCE) as a working electrode. The experimental and instrumental parameters were studied and discussed to ensure the validity of the method. RESULTS: The method has a very good linearity (R2 = 0.9984), wide concentration range (0.189 - 2.268 µg mL-1), low detection limit of 0.052 µg mL-1 and low quantitation limit of 0.172 µg mL-1. CONCLUSION: Linagliptin was identified successfully using the proposed method in pharmaceutical formulations, spiked human urine and plasma with 99.67, 91.96, and 92.78% recovery, respectively, and the results obtained were compared with other reported methods.

Towards understanding of the interaction of certain carbapenems with protein via combined experimental and theoretical approach.

The interactions of the recent carbapenems; ertapenem (ERP) and meropenem (MRP); with serum albumin (SA) were closely investigated by a combined spectrofluorometric experimental and theoretical approach. The approach is based on the quenching of fluorescence intensity of bovine serum albumin (BSA) upon binding with different carbapenems. The quenching was observed at λem 333-340 nm after excitation at 280 nm. Mechanism of interaction was found to be static quenching through hydrophobic and H-bonding interactions and confirmed with molecular docking using MOE software. Binding constant, binding number were estimated for both MRP and ERP. Thermodynamic parameters including entropy change (ΔS), enthalpy change (ΔH) and free energy change (ΔG) were calculated at three different temperatures. Moreover, BSA configuration during binding was investigated via synchronous and 3D spectrofluorimetry. Förster resonance energy transfer calculated (FRET), integration interval (J) and distance (ro) between BSA and the studied drugs were calculated to confirm the static quenching.

Spectrofluorometric determination of alogliptin an antidiabetic drug in pure and tablet form using fluorescamine, a fluorogenic agent: application to content uniformity test.

Alogliptin is an antidiabetic drug that belongs to a group called dipeptidyl peptidase-4 enzyme inhibitors. As the drug contains a primary amino group in its structure, it readily reacts with fluorescamine in slightly alkaline medium (borate buffer, pH 8.8) to form a highly fluorescent product. Emission of this product was measured at 477 nm (λex = 387 nm). The linear range between the fluorescence intensity and the drug concentration was 0.1-0.5 µg ml-1 with a good correlation coefficient (0.9986). Limits of detection and quantitation were 22 and 72 ng ml-1 , respectively. Guidelines of the International Conference for Harmonisation were followed to validate the developed method with acceptable results. Alogliptin content was determined successfully in its commercial dosage form using the fluorescamine method with good recovery (98.60-101.26%). The method has excellent levels of accuracy and precision compared with the reported method as assessed using Student's t-test and Fisher's exact test. The method was applied successfully for the content uniformity test with high recovery and low relative standard deviation.

Square-wave Adsorptive Anodic Stripping Voltammetric Determination of Antidiabetic Drug Linagliptin in Pharmaceutical Formulations and Biological Fluids Using a Pencil Graphite Electrode.

A simple, sensitive, low-cost, quick and reliable square-wave anodic stripping voltammetric method is described for the determination of the antidiabetic drug Linagliptin (LNG) in pure form, tablets, and spiked human urine and plasma samples. Using a pencil graphite electrode (PGE), cyclic voltammetry (CV) was applied to study the electrochemical behavior of LNG. In a Teorell-Stenhagen buffer (pH 5.5) containing 0.1 M NaClO4 as a supporting electrolyte, the LNG yields an irreversible well-defined oxidation peak at about 1.2 V vs. Ag/AgCl electrode. The various affecting factors, such as the pH, buffer type, supporting electrolyte, accumulation potential, scan rate and accumulation time, were tested and optimized. Also, square-wave adsorptive anodic stripping voltammetric (SWAdASV) studies show that the peak current various linearly over the LNG concentration range of 0.24 - 5.20 µg mL-1 (R2 = 0.9994). The detection and quantification limits were calculated to be 0.10 and 0.33 µg mL-1, respectively. The proposed procedure exhibits a good precision, selectivity, and stability and was applied successfully to determine the LNG in pharmaceutical formulations (tablets) and biological fluids (spiked human urine and plasma samples).

Factorial approach for the optimization and development of stability indicating study of the contraceptive suspension for injection(Depo-Provera®).

The study involves use of factorial design for optimization of forced degradation conditions and development of stability indicating method for medroxyprogestrone acetate (MPA) or depo-provera as known in the market. MPA is an important contraceptive and anticancer drug especially for treatment of breast cancer and it is the first time to study the different conditions affecting its stability. MPA was subjected to different variables such as solvent type, pH and the time subjected to UV light. Factorial design has been used during forced degradation to determine significant factors responsible for degradation and to optimize degradation conditions reaching maximum degradation. Factors responsible for forced degradation were statistically evaluated using Bubble and Surface plots. Variables proved to be significant (p < 0.05) and the suggested model represented a perfect example for indicating the efficiency of factorial designs in optimizing the degradation conditions that give maximum percent of degradation. We investigated also the solubility and stability profiles of MPA in aqueous solutions. Stability study results showed a very low stability profile of MPA in all the aqueous solutions with rapid degradation rate more than other solvents. The current research may contribute to enrich the knowledge of the physicochemical properties of this drug for exploring its full anticancer potential in the future.

TLC-spectrodensitometric method for simultaneous determination of dapagliflozin and rosuvastatin in rabbit plasma: stability indicating assay and kinetic studies.

Herein, a sensitive and reliable eco-friendly TLC-spectrodensitometric method has been established for the simultaneous determination of dapagliflozin (DAPA) and rosuvastatin (ROSV) for the first time. TLC separation was carried out on silica gel F254 using ethyl acetate : methanol (5 : 0.1, v/v) as a mobile phase and UV measurement at 243 nm. The method was fully validated according to ICH guidelines. Acceptable separation was achieved with R f values of 0.23 and 0.44 for DAPA and ROSV, respectively. Regression plots revealed linear relationships in the concentration range 20-2500 ng per band and 10-2500 ng per band with LODs of 6.60 and 3.57 ng per band for both DAPA and ROSV, respectively. The relative standard deviations (RSDs%) were found to be 1.35 and 0.53 for DAPA and ROSV, respectively. Moreover, kinetic studies were conducted for measurement of degradation rate constant (k) and half life time (t 1/2) of DAPA and ROSV via forced photo-degradation.

Poly (bromocresol green) flakes-decorated pencil graphite electrode for selective electrochemical sensing applications and pharmacokinetic studies.

A square wave voltammetric method for selective determination of meropenem (MRP) and ertapenem (ERP) was developed using pencil graphite electrode modified with poly (bromocresol green) (PGE/PBCG). The modified electrode film was characterized by scanning electron microscopy and electro-chemical impedance spectroscopy. Under the optimized conditions, the prepared electrode has good linearity over concentration range 1.0-60.0 and 0.3.0-75.0 µM for MRP and ERP, respectively. The developed method was validated according to ICH guidelines. In addition, the diffusion co-efficients of MRP and ERP were estimated to be 1.24 × 10-6 and 9.09 × 10-6 cm2 s-1, respectively using chronoamperometric technique. The developed method was highly sensitive and selective for the determination of MRP or ERP in the presence of their corresponding open beta-lactam ring degradation products. Consequently, it was successfully utilized for in-vitro and in-vivo applications in spiked and real plasma samples of healthy rabbits for their pharmacokinetic studies. Furthermore, the method was applied for the assay of the available dosage forms of both drugs.

Innovative HPTLC method for simultaneous determination of ternary mixture of certain DMARDs in real samples of rheumatoid arthritis patients: an application of quality by design approach.

A uniquely developed high performance thin-layer chromatographic (HPTLC) method coupled with UV detection was applied using quality by design approach (QbD) for simultaneous determination of methotrexate (MTX), sulfasalazine (SSZ) and hydroxychloroquine (HCQ) in serum and urine samples of rheumatoid arthritis patients. MTX, SSZ with HCQ are the most common disease-modifying antirheumatic drugs (DMARDs) combination used for the treatment of rheumatoid arthritis. This ternary mixture with montelukast (MK) added as internal standard, were separated by using a mixture of ethyl acetate: methanol: 25% ammonia, (8: 2: 3, v/v/v) as a mobile phase system. The separation was achieved on HPTLC precoated silica gel plate 60 F254 and the detection was carried out at 306 nm for MTX and at 340 nm for both SSZ and HCQ. The design was planned to obtain the most optimum retardation factors (Rf) with best resolution. The Rf values for MTX, SSZ, MK and HCQ were of 0.31 ±â€¯0.03, 0.62 ±â€¯0.02, 0.71 ±â€¯0.02 and 0.83 ±â€¯0.03; respectively. The interactive response optimizer achieved the most favorable conditions with acceptable composite desirability of 0.9703. Linear relationship with good correlation coefficients (r = 0.9990-0.9994) were also obtained with detection and quantification limits of 13.94-260.64 and 46.84-1810.01(ng/ml); respectively. The suggested method was established in accordance with the guidelines of Food and Drug Administration (FDA). The established QbD-HPTLC method achieved simple, sensitive and selective quantification of the studied drugs in serum and urine samples in the presence of their metabolites with no interferences. This method can be extended effectively for therapeutic drug monitoring and pharmacokinetics studies of these drugs.

Hydrophilic-interaction planar chromatography in ultra-sensitive determination of α-aminocephalosporin antibiotics. Application to analysis of cefalexin in goat milk samples using modified QuEChERS extraction technique.

A highly sensitive, selective and precise HPTLC method coupled with fluorescence detection was developed and validated for the determination of α-aminocephalosporin antibiotics; namely cefalexin, cefadroxil and cefradine in their standard solutions. The applicability of the developed methodology was demonstrated via analysis of cefalexin in goat milk samples. Full optimization of the fluorescence derivatization reaction was carried out with regard to the standard solutions of the studied compounds or after extraction of milk samples. The separation of the studied compounds was performed on HPTLC precoated silica gel plates 60 F254 using acetonitrile: water in a ratio 85:15 (v/v) as a mobile phase. The retention behavior of the formed derivatives was discussed in detail. It was found that hydrophilic interaction mode is the main interaction mechanism governing the retention of the formed derivatives. In addition, an experimental design approach was conducted for optimization of the chromatographic conditions. Modified QuEChERS was applied as an efficient extraction technique of cefalexin from both spiked and real goat milk samples. Optimization of QuEChERS extraction technique to achieve the highest extraction recovery was performed and the results indicate that this method provides a good extraction recovery (83-116%) for cefalexin from goat milk samples. Limit of detection (LOD) of the developed method was found to be 0.023, 0.005, and 0.023 ng band-1 for cefalexin, cefadroxil and cefradine, respectively in their standard solutions and 0.165 ng band-1 for cefalexin in goat milk samples. According to the achieved LOD values, the method sensitivity was quasi-equivalent to other methods based on expensive techniques such as HPLC-UV and HPLC-MS and it is sufficient to determine cefalexin below its MRL in milk samples. Moreover, the method was successfully applied to a pharmacokinetic study of cefalexin in goat milk after single intramuscular injection of 10 mg of cefalexin kg-1 per body weight.

ε-MnO2-modified graphite electrode as a novel electrochemical sensor for the ultrasensitive detection of the newly FDA approved Hepatitis C antiviral drug ledipasvir.

A novel, simple and sensitive electrochemical method for the determination of ledipasvir (LED), the newly FDA approved Hepatitis C antiviral drug was developed and validated using ε-MnO2-modified graphite electrode. Two different MnO2 polymorphs (γ- and ε-MnO2 nanoparticles) were synthesized and characterized using X-ray powder diffraction (XRD), Fourier transform infrared (FTIR), energy dispersive X-ray (EDX) and thermogravimetric analysis (TGA). Surface area measurements show that ε-MnO2 NPs have large surface area of 345 m2/g, which is extremely high if compared to that of γ-MnO2 NPs (38 m2/g). In addition, a comprehensive study of the difference in the electrochemical behavior of LED while using pencil graphite electrode (PGE) modified with either γ- or ε-MnO2 NPs is carried out. It was found that surface area and percentage of surface hydroxyls of MnO2 NPs are the key factors governing the sensitivity of the fabricated electrode toward the oxidation of the positively charged LED. Scanning electron microscopy (SEM) was employed to investigate the morphological shape of MnO2 NPs and the surface of the bare and modified electrodes. Moreover, cyclic voltammetry and electrochemical impedance spectroscopy (EIS) were used for the surface analysis of the modified electrodes. Based on the obtained results, ε-MnO2/PGE was applied as a selective and sensitive electrode for determination of LED. Under the optimized experimental conditions, ε-MnO2/PGE provides a linear response over the concentration range of 0.025-3.60 µmol L-1 LED with a low limit of detection, which was found to be 5.10 nmol L-1 (4.50 ng mL-1) for the 1st peak and 9.20 nmol L-1 (8.10 ng mL-1) for the 2nd one. In addition, the oxidation behavior of LED is discussed with a full investigation of the oxidized product using FT-IR and LC/MS. The fabricated sensor exhibits a good precision, selectivity and stability and was applied successfully for the determination of LED in its tablets and real rat plasma samples with a good recovery using a simple extraction technique.

Simultaneous TLC-densitometric determination of tamoxifen citrate and medroxyprogesterone acetate and UV-degradation kinetic study of medroxyprogesterone acetate.

Coadministration of tamoxifen citrate (TMC) and medroxyprogesterone acetate (MPA) is preferred to increase the response rate and the percentage recovery in patients with endometrial carcinoma. Administration of TMC and MPA and their combination affects estrogen and progestin receptor concentrations in advanced endometrium carcinoma by affecting 17ß-hydroxyl steroid dehydrogenase activity and serum hormone concentrations. A sensitive, accurate and robust thin-layer chromatography method has been established for simultaneous analysis of TMC and MPA. Method development was carried out on silica gel F254 using butanol-acetic acid-water (6:0.5:0.5, v/v/v) as mobile phase. Densitometric scanning was carried out at 241 nm for simultaneous detection of TMC and MPA. Retardation factor (Rf ) values for TMC and MPA were 0.21 and 0.85, respectively. The method was validated according to ICH guidelines. Regression plots revealed linear relationships in the concentration range of 50-500 and 25-250 ng/band for TMC and MPA, successively. Accuracy was ≥99.60 and 98.72% for TMC and MPA, respectively. Forced degradation studies using UV photodegradation was applied on MPA after exposure to UV light for different times and applying a kinetic study for calculating the degradation rate constant (k) and half-life time (t1/2 ).

Selective densitometric determination of four alpha-aminocephalosporins using ninhydrin reagent.

A simple, selective, and precise densitometric method for analysis of four alpha-aminocephalosporins, namely cefaclor monohydrate, cefadroxil monohydrate, cefalexin anhydrous, and cefradine anhydrous, both in bulk drugs and in formulations was developed and validated. The method employed thin-layer chromatography (TLC) aluminium sheets precoated with silica gel G 60 F(254) as the stationary phase. The solvent system consists of ethyl acetate-methanol-water with different ratios for all studied drugs (R(f) values of 0.40-0.60). The separated spots were visualized as blue to violet color after spraying with ninhydrin reagent. The linear regression analysis data for the calibration plots of all studied drugs produced a good linear relationship with correlation coefficients ranging from 0.9990 to 0.9996 and coefficients of determination ranging from 0.9986 to 0.9992 over the concentration range 2-10 microg/spot. The limits of detection and quantitation for all studied drugs ranged from 0.09 to 0.23 and from 0.27 to 0.84 microg/spot, respectively. The developed method was applied successfully for the determination of the studied drugs in their pharmaceutical dosage forms with good precision and accuracy. Also, the method can be employed as a promising stability-indicating assay.

Kinetic spectrophotometric determination of certain cephalosporins using oxidized quercetin reagent.

A simple, precise and accurate kinetic spectrophotometric method for determination of cefoperazone sodium, cefazolin sodium and ceftriaxone sodium in bulk and in pharmaceutical formulations has been developed. The method is based upon a kinetic investigation of the reaction of the drug with oxidized quercetin reagent at room temperature for a fixed time of 30 min. The decrease in absorbance after the addition of the drug was measured at 510 nm. The absorbance concentration plot was rectilinear over the range 80-400 microg mL(-1) for all studied drugs. The concentration of the studied drugs was calculated using the corresponding calibration equation for the fixed time method. The determination of the studied drugs by initial rate, variable time and rate-constant methods was feasible with the calibration equations obtained but the fixed time method has been found to be more applicable. The analytical performance of the method, in terms of accuracy and precision, was statistically validated; the results were satisfactory. The method has been successfully applied to the determination of the studied drugs in commercial pharmaceutical formulations. Statistical comparison of the results with a well established reported method showed excellent agreement and proved that there is no significant difference in the accuracy and precision.

Analysis of cephalosporin antibiotics.

A comprehensive review with 276 references for the analysis of members of an important class of drugs, cephalosporin antibiotics, is presented. The review covers most of the methods described for the analysis of these drugs in pure forms, in different pharmaceutical dosage forms and in biological fluids.

Spectroscopic analytical study for the charge-transfer complexation of certain cephalosporins with chloranilic acid.

Studies were carried out to develop a simple, rapid and accurate spectrophotometric method for the analysis of fifteen cephalosporins. The method depends on the charge-transfer complexation reaction between any of these drugs as an n-electron donor and p-chloranilic acid (p-CA) as a pi-acceptor to form a violet chromogen measured at 520 nm. Different variables affecting the reaction were studied and optimized. Under the optimum conditions, linear relationships with good correlation coefficients (0.9986-0.9996) were found between the absorbances and the concentrations of the studied drugs in the range of 4-1,200 microg ml(-1). The limits of assay detection ranged from 2.54 to 42.83 microg ml(-1). The accuracy and precision of the method were satisfactory. The method was successfully applied to an analysis of the studied drugs in their pharmaceutical formulations; the recovery percentages ranged from 96.76 +/- 0.87% to 100.50 +/- 1.30%. The interaction sites were confirmed by UV/VIS, IR, 1H-NMR techniques. Molecular modeling for the interaction was used for deriving an equation for calculating the epsilon value for a particular drug. This equation gave a perfect prediction for the degree of interaction of the investigated drugs with the p-CA reagent.

Spectrofluorometric determination of certain quinolone antibacterials using metal chelation.

Simple, rapid, reliable, and sensitive spectrofluorometric methods were developed for the determination of eight quinolone antibacterials namely ciprofloxacin, norfloxacin, lomefloxacin, difloxacin, amifloxacin, pefloxacin, ofloxacin, and nalidixic acid. The methods depend on the chelation of each of the studied drugs with zirconium, molybdenum, vanadium or tungsten to produce fluorescent chelates. Different factors affecting the relative fluorescence intensity of the resulting chelates were studied and optimised. At the optimum reaction conditions, the drug-metal chelates showed excitation maxima ranging from 274 to 295 nm and emission maxima ranging from 409 to 495 nm. The chelates were found to be stable at room temperature for 2 days and show good stability upon increasing temperature to 50 degrees C for about 1 h. Rectilinear calibration graphs were obtained in the range of 10-60 ng ml(-1) for each of the investigated drugs and the limits of detection and quantitation ranged from 1.214 to 2.046 and from 4.047 to 6.819 ng ml(-1), respectively. The molar ratios of the formed chelates were determined by Job's method and their association constants were also calculated. The developed methods were applied successfully for the determination of the studied drugs in their pharmaceutical dosage forms with a good precision and accuracy compared to official and reported methods as revealed by t- and F-tests. They were also applied for the determination of studied drugs in spiked urine and plasma samples.

Selective spectrophotometric determination of phenolic beta-lactam antibiotics.

Two simple and selective spectrophotometric methods were developed for the quantitative determination of cefoperazone sodium, cefadroxil monohydrate, cefprozil anhydrous and amoxicillin trihydrate in pure forms as well as in their pharmaceutical formulations. The methods are based on the selective oxidation of these drugs with either Ce (IV) or Fe (III) in acid medium to give an intense yellow coloured product (lambda(max)=397 nm). The reaction conditions were studied and optimized. Beer's plots were obeyed in a general concentration range of 5-30 microg ml(-1) with correlation coefficients not less than 0.9979 for the four drugs with the two reagents. The methods are successfully applied to the analysis of pharmaceutical formulations containing amoxicillin, either alone or in combination with potassium clavulanate, flucloxacillin or dicloxacillin. They were also applied to the analysis of the other three studied drugs in vials, capsules, tablets and suspensions with good recovery; percent ranged from 99.7 (+/-0.46) to 100.32 (+/-1.05) in the Ce (IV) method and 99.6 (+/-0.50) to 100.3 (+/-1.32) in the Fe (III) method. Interferences from other antibiotics and additives products were investigated.